Ⅰ.Creation Position
Create Asset—Parametric Model Library—New—Internal Parts— Door
II.Setting Parameters
2.1 Basic Parameters:
2.1.1 Width (W) - Represents the size of the model panel in the X-axis direction. Set the value type as a range (e.g., range 10-2400, current value: 400).
2.1.2 Depth (D) - Represents the size of the model panel in the Y-axis direction. Set the value type as a options (e.g., optional 18, current value:18).
2.1.3 Height (H) - Represents the size of the model panel in the Z-axis direction. Set the value type as a range (e.g., range 10-2400, current value: 800).
2.1.4 Material - No modification needed, indicating that the Door uses the default material.
Ⅲ Frame develop modeling
3.1 Select develop from part, and select contour from library,then edit path
Point 1(0,0);point 2(0,#W); point 3(#H,#W); point 4(#H,0)
Physical attributes:
rotateY:-90,rotateZ:90
Ⅳ Import door core panel
4.1 Import a flat panel from library as door core.
4.2 Edit dimensions and physical attributes
Width:#W-70*2,Depth:9,Height:#H-70*2. PositionX: 70,positionZ: 70.
Ⅴ. Test the Model
Input values within the range of parameters W, D, and H, observe if the model changes correctly. If it does, it means the model is working fine.
Ⅵ. Save to Library
Click on the file in the upper right corner and choose save, select the subdirectory for saving, name it, and click save.